Single-component High-pressure grouting injection pump for crack repair

Single-component Injection pump is the use of mechanical pressure leakage power (high pressure meeting the concrete cracks slurry water quick dispersion, emulsion, inflation, unity elastomeric fill all concrete crack, will be completely blocked in the concrete structure outside the body, in order to achieve the purpose of the leakage of water stop.

There are four kinds of single-component injection pumps for your choose,

Item No.	Picture	Technical Datas
KS-500 Injection Pump (one-component)		The Maximum output pressure	11000psi
		The Second Start-up Pressure	8500psi
		High-pressure pipe's Maximum Burst pressure	10000psi
		The Safty range of Switch Valve	10000psi
		Flow	0 - 0.8L/min
		Motor Driver	220V/560W/50HZ
KS-512 Injection Pump (one-component)		The Maximum output pressure	10000psi
		The Second Start-up Pressure	7500psi
		High-pressure pipe's Maximum Burst pressure	10000psi
		The Safty range of Switch Valve	10000psi
		Flow	0 - 0.7L/min
		Motor Driver	220V/500W/50HZ
KS-600 Injection Pump (one-component)		The Maximum output pressure	12000psi
		The Second Start-up Pressure	8500psi
		High-pressure pipe's Maximum Burst pressure	13000psi
		The Safty range of Switch Valve	13000psi
		Flow	0 - 0.8L/min
		Motor Driver	220V/560W/50HZ
KS-999 Injection Pump (one-component)		The Maximum output pressure	13500psi
		The Second Start-up Pressure	10000psi
		High-pressure pipe's Maximum Burst pressure	15000psi
		The Safty range of Switch Valve	18000psi
		Flow	0~1.5L/min
		Motor Driver	220V/650W/50HZ

Scope of Application:

1. A variety of buildings and underground concrete cracks, expansion joints, construction joints, structural joints sealed plugging

2. Geological drilling engineering drilling wall plugging reinforcement

3. Water conservancy and Hydropower Project reservoir dam grouting, plugging cracks in the tunnel water, waterproof, impervious dam reinforced concrete cracks

Instruction:

1. Before starting, please confirm whether the switch of electric drill is in R (forward) position or not.

2. When first time used the new machine, you should pour the lubricating oil into material cup and open the power then rotate the material cup over again.

3. After completing construction, you must use the cleaning agent clean the machine immediately.

Get Price And Support

Message:

KunShan Adhesive Package International Co., Ltd

Product Catalogues

Injection Pumps &Accessories

Single-component High-pressure grouting injection pump for crack repair

Related Product

Accessories of Pump

Accessories------Pistons of Pump

Aluminum Injection Packer

Double-component Liquid grouting injection pump for crack repair

Single-component High-pressure grouting injection pump for crack repair